REFIT & REPAIR

Protecting and enhancing your asset

A yacht refit is a complex business. Without effective management, careful planning and ongoing evaluation it’s something that can quickly go over budget and schedule. Phi Yachts act as an effective management partner; ensuring the refit is efficient and economical. Our technical team have had long careers across the marine sector and have excellent contacts across every marine trade, with a practical appreciation of the refit process.

REFIT & REPAIR

COMPLETED REFIT WORKS

We have completed refit works on over 20 vessels. You can view a further selection of these past projects here.

Drag

MAGNUM MARINE 40

.

.

REFIT DETAILS

  • Riverniciatura integrale
  • Nuova tappezzeria interni ed esterni
  • Modifica mobilio pozzetto
  • Installazione nuovo impianto audio
  • Restyling cabine.
  • Complete repaint.
  • New interior and exterior upholstery 
  • Redesigned cockpit furniture 
  • Installation of a new audio system
  • Restyling of the cabins
Drag

AMER 100 2019

Phi refit ha avuto incarico di svolgere un importante intervento su questo Amer 100 del 2019. Le richieste del committente sono state una completa verniciatura di scafo e sovrastrutture e una modifica del layout interno. Nell’ambito dei lavori di verniciatura, una volta portata a 0 la carena, sono state posate due mani di primer e due mani di antivegetativa. Inoltre è stato eseguito un trattamento Prop Speed sulle eliche. Relativamente alle sovrastrutture, le lavorazioni svolte hanno previsto la carteggiatura, resinatura e ripristino delle crepe presenti, per poi passare alla stesura del primer, del sottosmalto e dello smalto. Lucidatura e applicazione di nuove siliconature hanno completato l’intervento. Per quanto riguarda i lavori che hanno riguardato i locali sottocoperta, la configurazione iniziale prevedeva 4 cabine ospiti ed è stato svolto un lavoro di trasformazione con il quale da due delle cabine originarie è stato ricavato uno studio ed un salotto. Tra gli obiettivi dell’intervento vi era anche il miglioramento dell’insonorizzazione dei locali. In particolare si è intervenuti con pannelli fonoassorbenti per risolvere il problema della diffusione dei rumori tra cabina armatoriale e cucina e tra le due cabine ospiti. Infine, in occasione di questo refitting, è stata installata a bordo una nuova domotica di ultima generazione, in grado di permettere la verifica di tutti i parametri da remoto tramite App e sono stati installati pannelli fotovoltaici e un pacchetto supplementare di batterie al fine di rendere energeticamente autonoma l’imbarcazione.

Phi refit was commissioned to carry out an important intervention on this 2019 Amer 100. The client's requests were a complete painting of the hull and superstructures and a modification of the internal layout. As part of the painting work, once the hull was brought to 0, two coats of primer and two coats of antifouling were applied. A Prop Speed treatment was also performed on the propellers. With regard to the superstructures, the work carried out involved sanding, resining and repairing the cracks present, and then moving on to applying the primer, undercoat and topcoat. Polishing and application of new silicones completed the intervention. As regards the works that involved the spaces below deck, the initial configuration envisaged 4 guest cabins and a transformation work was carried out which converted two of the original cabins into a study and lounge. Among the objectives of the intervention there was also the improvement of the soundproofing of the premises. In particular, interventions were made with sound-absorbing panels to solve the problem of noise diffusion between the owner's cabin and the galley and between the two guest cabins. Finally, on the occasion of this refitting, a new latest generation domotics was installed on board, capable of allowing all the parameters to be checked remotely via the App and photovoltaic panels and an additional battery pack were installed in order to make the boat is energetically autonomous.

Drag

BERTRAM 28 MOPPIE 1990

Affascinante imbarcazione dello storico cantiere americano Bertram, completamente refittata da PHI LAB nel 2022 regalandogli un nuovo valore ma mantenendo la sua identitĂ , unica e irripetibile.

Fascinating boat of the historic American shipyard Bertram, completely refitted in 2022 by Phi Refit, giving it a new value but lying its unique and unrepeatable identity.

REFIT DETAILS

 

  • MOTORI NUOVI LVM 
  • INVERTITORI NUOVI
  • NUOVA LINEA D’ASSE COMPLETA DI ELICHE E CAVALLETTI
  • NUOVI FLAPS
  • RIVERNICIATURA TOTALE INTERNA ED ESTERNA
  • NUOVO SERBATOIO CARBURANTE
  • NUOVO IMPIANTO ELETTRICO CON QUADRI
  • NUOVA ELETTRONICA DI NAVIGAZIONE
  • NUOVE TAPPEZZERIE INTERNE ED ESTERNE
  • NUOVI PRENDISOLE MAGGIORATI IN POZZETTO
  • NUOVI TENDALINI
  • NUOVA PLANCETTA DI POPPA MAGGIORATA

 

  • NEW LVM ENGINES
  • NEW INVERTERS
  • NEW SHAFT DRIVE WITH PROPELLERS AND STANDS
  • NEW FLAPS
  • TOTAL INTERNAL AND EXTERNAL REPAINTING
  • NEW FUEL TANK
  • NEW ELECTRICAL SYSTEM, ELECTRICAL PANELS
  • NEW NAVIGATION ELECTRONICS
  • NEW INTERIOR AND EXTERIOR UPHOLSTERY
  • NEW INCREASED SUNDECKS IN THE COCKPIT
  • NEW AWNINGS
  • NEW AFT PLATFORM
Drag

RIVA RIVARAMA 44 #31 M/Y NASH 2018

Riva, has always been synonymous of elegance and luxury, a symbol of the Made in Italy, thanks to its attention to details and its unique style, yachts by Riva keep seducing sea lovers all over the world, maintaining their typical appeal that makes them unique.

Drag

RIVA RIVALE 52 2018

2 Riva Rivale's went through a complete refit in 2018. Some of the works carried out are: replacing all the upholstery, the bimini, make new covers, complete paint job of the hull and super-structure, etc. In addition, the special MAN master-service to the engines has been carried out (after 700 hrs)

Drag

APREAMARE MAESTRO 66

The complete refit works for the motor yacht Apreamare Maestro 66. She is produced by the brand Apreamare since 2013. Apreamare Maestro 66 is a 21.30 meters semi-displacement yacht with a draft of 1.80 meters which can reach up to 32 knots. The yacht has CE certification class (B) and can go not further than 200 miles off the coastline.

REFIT & REPAIR

SERVICES

Even the best-maintained yachts eventually require refit, repair or conversion. Whatever your needs are, whatever type and make of yacht you own, you can count on us to carry out the work with the precision and attention to detail.

SERVICES

TEAK REPAIRS & NEW DECKING

Phi Refit specializes in teak replacements, either planks or full decking. We also offers teak rejuvenation/restoration services where we sand, recaulk, replace planks, replug, sand and treat your teak decks, bringing them back to life and giving them added durability.

SERVICES

STEEL FABRICATION & DESIGN

From a simple repair to full construction of stainless steel fixtures and railings, we can arrange for any stainless steel fabrication and design work to be carried out on your yacht to the highest of standards.

SERVICES

PAINT & VARNISH

From small spot repair to full paint jobs UYS offers super yacht quality. We also varnish capping rails, tables and cabinetry in our climate controlled spray booth.

SERVICES

CARPENTRY, FIT-OUTS & SHIP BUILDING

Phi Refit can organise any carpentry work or shipwrighting to be carried out by qualified and experienced quality tradesmen.

REFIT & REPAIR

CONTACT

Please email us using the form below for your refit, repair or conversion inquiries.